Consumables
£24.95 – £254.95
As used in our workshop for repairs and sealing. This is a universal, durable, elastic, 1-component, MS polymer-base silicone free adhesive and sealant.
Very good adhesion to almost all surfaces such as plain, zinc-plated, primed or varnished sheet steel, aluminium, stainless steel, copper, plastic, ABS, hard PVC, concrete, wood, glass etc.
15% discount available for a case of 12
- Moisture-curing
- Good levelling properties
- When freshly applied, can be painted over with almost all varnish types commonly used in the trade (please test it yourself beforehand)
- Bonded sheeting can be spot welded
- Solvent-free
- Isocyanate- and silicone-free
- Weatherproof
Not suitable for polyethylene, polypropylene, silicones, PTFE (Teflon®) or soft plastics.
This advice is purely a set of recommendations based on our experience. We advise that you test it for yourself beforehand.
Application areaIdeal for elastic adhesive bonding in the construction, metal/automotive industry, mechanical engineering, shipbuilding etc.
Instructions
The surfaces must be clean, dry and free from dust and grease. For best results, we recommend using primer. Apply the primer in a thin layer, according to the surface, on the cleaned, grease-free and dry adhesion surfaces. Before applying the sealant, the primer must have evaporated. Please observe the specified drying times.
Most primers contain flammable solvents and are moisture-sensitive. It is therefore advisable to close the container immediately after use. Tip: The material should be primed or varnished over the top within 2 hours, otherwise there is a risk of adhesion problems.
| Weight | 0.00 kg |
|---|---|
| Size | 1, 12 |